ssgscpsetup - Sensor Seal Documentation

The

ssgscpsetup

command is used to set the SSGSCP server configuration if SSGSCP was chosen as the connectivity type over which Sensor Seal measurements will be sent. When running this command, a new SSGSCP private Pre-Shared Key (PSK) will be generated and displayed. You should make note of this new private key as it will need to known by the server.

Note: This syntax is not finalized

Syntax

ssgscpsetup <Server Hostname or IP> <Port>

<Server Hostname or IP>
: The hostname or IP address of the SSGSCP server to connect to
<Port>
: The UDP port that the SSGSCP server is listening on (usually 1818)

Example

ssgscpsetup my-ssgscp-server.example.com 1818

SSGSCP server configuration set A new private key has been generated. Keep this secure: 67 82 60 ef 97 f3 ae d8 b2 19 f7 28 85 cf c9 9a b7 ba 96 a1 41 51 d2 e9 2a af 93 36 c5 b7 6a d1